Rubber surfacing on a Sault Ste. Marie patio, on a walkway or on a flight of steps covers the existing concrete, pavers, stamped concrete or wood, so the surface drains, grips in ice and hides the cracks and worn nosings of an older slab. We trowel the rubber surfacing on at 3/8 to 1/2 of an inch and wrap every step edge. From the first wash to the last of the cure, the job you book with us is fully insured.
Rubber surfacing on front steps gives a tread that drains and grips, so the sheet of ice that forms on a smooth concrete step after a January thaw does not form. Steps on a 1950s house in Steelton or on the east side have been shoveled, salted and chipped for seventy winters, and the nosing is usually rounded off or broken. A visitor coming up from Queen Street in a sleet finds that out the hard way.
Rubber surfacing wraps the nosing, gives every riser a clean edge again, and keeps its texture in wet and cold. Salt does it no harm, and a plastic-edged shovel leaves it clean.
Rubber surfacing turns a cracked, tilted patio or a paver walk with weeds in every joint into one seamless surface that rides the ground's movement instead of fighting it. The glacial-lake clay under most of the city heaves in frost and settles in thaw, and a patio in Korah or Bayview that has done that for thirty years is a map of hairline cracks and lifted corners. Pavers spread at the joints and the sand washes out, and rubber surfacing is the one fix that does not start with a bin.
Rubber surfacing bridges the static cracks and the paver joints, so there is no line for weeds to root in and no edge to trip on. Where a slab is still moving, we fix that first, because the rubber can hide a crack but cannot hold a slab down.
We pour rubber surfacing on the patio, walkway or steps as they stand, once they have been pressure washed or ground to bare, clean, dry material and cleared of sealer, paint or moss. Static cracks are filled, moving ones are repaired, and the slab is primed. Granules and binder are blended beside the job and spread by hand trowel to the depth written into the quote, with a finished edge at the grass, the driveway and every riser.
Colour comes from EPDM granules that carry it right through, so a grey walk or a tan patio does not wear back to black in the traffic path. Most patio, walk and step rubber surfacing jobs in the Sault finish inside a day and take feet the next morning.
A patio, a walkway or a flight of steps in the Sault, Prince Township or Goulais River is quoted for rubber surfacing after a no-cost look, and the written sheet sets down the granule chosen, the depth in inches, the footage taped, and the total. Patios, walks and steps in this region tend to land between eight and sixteen dollars for each square foot over what is already there, and a short flight of steps on its own carries a minimum. A pool deck on the same property is quoted alongside under our pool deck surfacing.
Browse our other rubber surfacing services, or contact us about the steps before the ice comes back. Call +1 705-805-5867.
The same granules and binder go on every surface below.
Pool deck rubber surfacing in Sault Ste. Marie goes down over whatever the deck is now, concrete, pavers or wood, so the deck drains, grips wet feet and stays cool through the short Algoma swim season. We trowel the rubber surfacing to a depth of three-eighths of an inch to half an inch, bridging the cracks and sealing the coping edge. From the first wash to the last of the cure, the job you book with us is fully insured.
View Pool Deck Surfacing
Rubber surfacing on a Sault Ste. Marie driveway or garage floor is laid over the concrete or asphalt already there, so salt brine, slush and tire grit stop pitting the slab underneath. Garage floors get rubber surfacing at 3/8 to 3/4 of an inch; driveways get 3/8 to 1/2. From the first wash to the last of the cure, the job you book with us is fully insured.
View Driveway and Garage Floor Surfacing
Playground rubber surfacing in Sault Ste. Marie is poured over a compacted stone base or existing concrete, as deep as the equipment's fall height calls for, at schools, daycares, parks and backyards across Algoma. Our playground rubber surfacing is two layers, black recycled cushion underneath and coloured EPDM on top, seamless from edge to edge. From the first wash to the last of the cure, the job you book with us is fully insured.
View Playground Safety Surfacing
Gym and fitness rubber surfacing in Sault Ste. Marie is poured over a concrete slab in a basement, garage, studio, clinic or training room, at 3/8 to 3/4 of an inch, for a seamless floor that shrugs off dropped weight, keeps machines quiet and dries off a wet boot. The rubber surfacing is black recycled granule with colour troweled in where it is wanted. From the first wash to the last of the cure, the job you book with us is fully insured.
View Gym and Fitness Flooring
Commercial and equestrian rubber surfacing in Sault Ste. Marie is poured on ramps, entrances, walkways, splash pads, patios, rooftop terraces, and barn and arena aisles, for businesses, clinics, seniors' residences, schools and horse owners across Algoma. We pour rubber surfacing over concrete, asphalt or a compacted base and schedule the work around your hours and your animals. From the first wash to the last of the cure, the job you book with us is fully insured.
View Commercial and Equestrian SurfacingOne visit is enough to measure the surface and check the slab. Granule, depth, square feet and price all go on the quote that follows.
Fill in what you know and we will phone you to set up the visit. We insist on nothing beyond your name and a way to reach you. If you would rather talk, the number is +1 705-805-5867.
